Pc Settings - Furrion Aurora FDUP43CBR Manuel D'instructions

TV Settings

PC Settings

The PC menu is only accessible when a PC is connected to the TV via the VGA connection.
Press Source button to select VGA as the input source.
1. Press MENU button, the setup window will appear on the screen.
2. Use or to highlight Setup mode.
3. Use or to highlight Advanced, then press OK or
4. Use or to highlight the item you would like to reset, then press
settings.
5. Press MENU to return to the previous menu or press EXIT at any time to exit the setting.
H-Pos Configure the horizontal position of the TV image.
V-Pos Configure the vertical position of the TV image.
Clock Adjust the pixel Clock (vertical )for a clearer image.
Adjust the phase Clock (horizontal) for a clearer
Phase
image.
Auto Automatically adjust the PC settings.
PC MONITOR DISPLAY MODES
Mode Resolution
VGA 640 x 480
VGA 720 x 400
VGA 1366 x 768
SVGA 800 x 600
XGA 1024 x 768
WXGA 1280 x 720
Advanced Sub-Menu
Refresh Rate
60/75 Hz
70 Hz
60Hz
60/75 Hz
60/70/75 Hz
60 Hz
to enter the sub menu.
Press or to move the screen horizontally.
Press or to move the screen vertically.
Press or to adjust the pixel clock vertically.
Press or to adjust the phase clock horizontally.
Press OK or to adjust all PC settings automatically.
PC MONITOR DISPLAY MODES
Mode Resolution
WXGA 1360 x 768
SXGA 1280 x 1024
WXGA+ 1440 x 900
WSXGA+ 1680 x 1050
FHD 1920 x 1080
or to select the
Refresh Rate
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
31