Voicemail; Setup; Message Waiting; Retrieving Messages - ZTE MF288 Additif Au Guide D'utilisation

Voicemail

Your MF288 supports wireless voicemail. Follow the steps below to set up and use your
voicemail.

Setup

Dial 1 on any home phone connected to your device and wait for 2~4 seconds to connect
to your wireless voicemail. Simply follow the voice prompts to complete setup.

Message Waiting

There are two indicators for a new message waiting: 1) the voicemail indicator
2) an intermittent dial tone.
The voicemail indicator on your device flashes when a voicemail message is waiting.
You will also hear an intermittent dial tone on any connected phone handset before
placing a call.

Retrieving Messages

To retrieve voice messages, dial 1 on any home phone connected to your device and
wait for 7~8 seconds to connect to your wireless voicemail box.
Simply follow the voice prompts to listen to and manage your messages. (Alternately,
you may dial your 10-digit home phone number to access your voicemail box.)

WebUI Configuration

Accessing the Configuration Page

1. Make sure the connection between your devices is active (either by cable or WiFi).
2. Launch the Internet browser, and then enter http://192.168.0.1 (or other IP if you
have changed it from the default) or http://setup.zte in the address bar.
NOTE:
It is recommended that you use IE (8.0 or later), Firefox (31.0 or later), Opera (23.0 or later),
Safari (6.2 or later) or Google Chrome (36.0 or later).
The login page will appear as follows.
3.
10 Confidential and Proprietary Information of ZTE CORPORATION
ZTE MF288 User Guide
; and