Calling; Making A Call; Three-Way Calling; Call Waiting - ZTE MF288 Additif Au Guide D'utilisation

ZTE MF288 User Guide
Manual
NOTE:
If you want to modify the detailed parameters of your device, please log into the WebUI
configuration page by visiting http://192.168.0.1 or http://setup.zte. The default password is
admin.
Parents Control
Your MF288 allow your monitor your kids 'internet use. Only HTTP websites can be tracked and
only support IPv4 address.

Calling

Making a Call

Using a phone connected to your device allows you to place and receive calls as you
normally would. The device supports both cordless and corded phone dialing methods.
Note: Make sure to dial the 10-digit phone number, including area code.

Three-Way Calling

While on an existing call, press the Flash (or Talk) key on your phone to put the first party
on hold. When you hear a dial tone, dial the second party's number (wait up to four
seconds).
When the second party answers, press the Flash (or Talk) key again to complete the
three-way connection. If the second party does not answer, press the Flash (or Talk)
key to end the connection and return to the first party.
NOTE:
If your phone does not have a Flash (or Talk) key, use the off-hook mechanism supported by
your phone instead.

Call Waiting

Press *43# or #43# to enable or disable Call Waiting features.
You will hear two tones if someone calls while you are already on a call.
To hold the current call and accept the waiting call, press the Flash (or Talk) key.
1. Log in the WebUI configuration page.
2. Select Settings > Connection Mode > Manual, and
then click Apply.
3. Select Home, and then click Connect or Disconnect.
Confidential and Proprietary Information of ZTE CORPORATION 7