Safety - Vortice VORT SUPER DRY UV Notice D'emploi

ENGLISH

Safety

Attention:
!
this symbol indicates that care must be taken
to avoid injury to the user
• Do not attempt to install the unit yourself unless you are a trained services technician. Otherwise, this may affect the
safety and proper functioning of the unit.
• Read this manual thoroughly and carefully before beginning to use the unit, ensuring safety and proper function. Please
keep it well for later reference.
• Do not open the front panel ,otherwise this may get an electrical shock.
• Children forbidden hanging on the machine. There is risk of falling.
• Do not use in a wet environment, for example, near the bathroom where it may get the direct water and the places where
the condensation may form, otherwise, this may cause electric shock and unit malfunction.
• Do not allow the unit get wet, otherwise, it will cause electric shock.
• Do not modify and disassemble the unit unnecessarily. Otherwise, this may cause a fire, electric shock, or personal injury.
• If the cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to
avoid a hazard.
• For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not
exceeding 30mA is advisable in the electrical circuit supplying the bathroom, ask your installer for advice.
•This appliance is not considered suitable for use by individuals (including children) with reduced
physical, sensory or mental capacities, or lacking in experience and knowledge, unless they are
supervised or instructed in its use by a person responsible for their safety. Children must always be
supervised to ensure that they do not play with the appliance.
• Children must not play with the appliance.
• Cleaning and maintenance work on the appliance must not be performed by children without
supervision.
• Installation of the appliance in bathrooms (where there are bath-tubs or showers) must be in
accordance with current regulations.
• Rated power is required.
• If power tolerance is over ±10%,there will be breakdown. If using incorrect power supply, fire, electric shock and machine
Caution
:
!
this symbol indicates that care must be taken
to avoid damaging the appliance
malfunction will happen.
• Please use dedicated socket if using together with other appliances, the socket
may cause abnormal heat leading to fire.
• Power must be cut off when maintenance to prevent the risk of electric shock.
• Drain tank and air filter must be installed. Do not switch on after power connected
for 10 seconds.
• If the machine doesn't work or have abnormal conditions, please cut off power to
prevent accidents, and close leakage circuit breaker and ask supplier to check and
repair, or it may lead to fire because of electricity leakage and short circuit
• It must have the reliable growing wire, otherwise it may cause electric shock risk
when the unit failure or leakage.
• Attention when installation: do not install when the machine are power connected.
• It must operate by the professional construction person when install the unit. If the
construction incorrect, it may cause electric shock and fire accident.
• Specifications for the power supply must correspond to the electrical data on data
plate A. (Fig.A) (Fig. A).
• The appliance must be installed by a professionally qualified
electrician.
• A multi-pole switch must be used to install the appliance. The contact
opening gap must be no less than 3 mm.
A
A
A
17