Warning – Charging
As a rule, do not charge devices or
USB connections that are defective
and do not try to repair them yourself.
6. Operation
Note
• The functions described in this
section are only available for
Bluetooth-capable terminal devices.
• Note that the max. range of
Bluetooth without any obstacles
such as walls, people, etc. is
10 metres.
4
6.1. Bluetooth connection
Note - Pairing
• Make sure that your Bluetooth-
capable terminal device is on and
Bluetooth is activated.
• Make sure that your Bluetooth-
capable terminal device is visible
for other Bluetooth devices.
• For more information, please refer
to the operating instructions of
your terminal device.
• Slide the ON/OFF switch to ON.
• The status LED initially illuminates blue,
then switches off for several seconds
before flashing blue.
• This means the Bluetooth remote
release is searching for a Bluetooth
connection.
• Open the Bluetooth settings on your
terminal device and wait until hama
selfie appears in the list of Bluetooth
devices found.
• Select hama selfie and wait until
hama selfie is listed as connected in
the Bluetooth settings on your terminal
device. The status LED (2) switches off.