Icy Dock MB662 Série Manuel D'utilisation page 8

6-3. RAID notification
1.
It is better to use the same hard drive brand and memory capacity to use the RAID functions.
2.
When using a MB662US-2S with an eSATA connector to set JBOD function, if the host
cannot support port multiplier function, the computer may not be able to detect 2 hard
drives simultaneously. (You may need to purchase the optional port multiplier eSATA
controller card to get the enclosure working properly)
3.
It takes about an hour to rebuild a 100GB hard drive.
MB662UEAB-2S LED Status
HDD Access
No HDD in Position
HDD Failure
Rebuilding & Verifying
HDD Idling
MB662US-2S LED Status
HDD Access
No HDD in Position
HDD Failure
Rebuilding
Rebuilding Verifying
HDD Idling
Status
Flashing White LED
Red LED
Red LED
LED blinking in White & Blue (Source Drive)
LED blinking in White & Red (Target Drive)
White LED
Status
Flashing Purple LED
LED blinking in Blue & Red
LED blinking in Blue & Red
Purple LED (Source Drive)
LED blinking in Red & Purple (Target Drive)
Blue LED (Source Drive)
Purple LED (Target Drive)
Blue LED
English
7