Sanyo VCC-ZM500P Manuel D'installation page 7

Connection with a communication device for remote operation
Digital Video
Recorder etc.
Power Supply Connection
b With AC 24 V
GND GND
~ ~
~ ~
For the connections, use cables thicker
than 18 AWG.
b With DC 12 V
Check that +/- polarity is correct.
– –
+ +
For the connections, use cables thicker
than 18 AWG.
Monitor Connection
• Using different cables from those
specified here may attenuate the
video and/or sync signals and
interfere with correct transmission.
• RG-59U coaxial cables can be
used when distance between
devices is short, but not in duct or
aerial routing.
Cable type
RG-59U (3C-2V)
RG-6U (5C-2V)
RG-11U (7C-2V)
6
Controller
Length
250 m (273 yds) max.
500 m (547 yds) max.
600 m (656 yds) max.