Screens - Sanyo VCC-ZM500P Manuel D'installation

How to Perform the Settings in the Menu Screens
This manual and the electronic manual
which is contained in the supplied
CD-ROM describe the operations using the
buttons on the camera.
The optional camera control unit (VAC-70)
can be used to perform same operations
as the camera.
For details, refer to the instruction manual for
the camera control unit.
1 Displays the main menu.
Press and hold down the SET
button for 3 seconds or longer to
display the main menu.
2 Moves the cursor during menu
setting operations.
3 Switches the menu screen.
4 Performs focusing or zooming
in/out operations.
While the auto-focus function is
activated, you can perform
focusing operations using the
buttons.
j: NEAR l: FAR
d: WIDE c: TELE
A Using the buttons on the
camera
2
4
B Using the VAC-70 camera
control unit (optionally
available) to perform the
settings remotely
1
9
1
3
SET
2
4
3