Connection - JVC KD-R671 Manuel D'instructions

Wiring connection
Antenna terminal
Connecting the ISO connectors on some VW/
Audi or Opel (Vauxhall) automobiles
You may need to modify the wiring of the
supplied wiring harness as illustrated below.
A7 (Red)
Vehicle
A4 (Yellow)
Default wiring
* You can also connect a subwoofer speaker directly without
an external subwoofer amplifier. For setting, 10.
If your car does not have an ISO terminal
We recommend installing the unit with a commercially available
custom wiring harness specific for your car and leave this job to
professionals for your safety. Consult your car audio dealer.
KD-R671
Front output
Rear/subwoofer output
Yellow (Battery wire)
Red (Ignition wire)
Ignition wire
(Red)
Unit
Battery wire
Red (A7)
(Yellow)
Yellow (A4)
ISO connectors
KD-R571 / KD-R474 / KD-R472 /
KD-R471
Rear/subwoofer output
Fuse (10 A)
If no connections are made, do not let the wire
come out from the tab.
Light blue/yellow
STEERING
(Steering remote
WHEEL
REMOTE
control wire)
Pin Color and function
A2 Brown : Mobile phone system
A4 Yellow : Battery
A5 Blue/White : Power control
A6 Orange/white : Car light control switch
A7 Red : Ignition (ACC)
A8 Black : Earth (ground) connection
Purple ]
B1
: Rear speaker (right)
Purple/black [
B2
B3 Gray ]
: Front speaker (right)
B4 Gray/black [
White ]
B5
: Front speaker (left)
White/black [
B6
Green ]
B7
: Rear speaker (left) *
B8 Green/black [
When connecting to an external
amplifier, connect its ground wire to the
car's chassis to avoid damaging the unit.
Part list for
installation
(A) Faceplate
(B) Trim plate
To the steering wheel
remote control adapter
(C) Mounting sleeve
(D) Wiring harness
(E) Extraction key
17
ENGLISH