poolstar Froggi Prime Guide D'installation Et D'utilisation page 27

28. Insert the steps of the ladder (U) in
the metal tubes (W) so that the place of
the nut is the same side as the curvature
of the tubes.
30. Return the ladder holding the nut
and aims at using the Allen key (F) and
repeat for each bindings.
32. Close entry with zip and tighten input hooks. Install the
ladder (U).
Proceed to "security check" before using.
We recommend if necessary to attach the legs with the fastening strap floor fixing (Y) and stakes (X).
29. Put a hexagonal nut (V) in his place.
31. The ladder must be like this picture.
27
EN