16. Arranging the poles on the trampo-
line as follows.
18. Finally with flange nuts (Q) and the
keys (E and F), screw the amount on the
fleg with two fasteners.
Repeat for the other poles.
20. Inserting the sleeves (R) in the safe-
ty net (S) as follows. Be sure to let the
end overtake the gap.
17. Assemble the long screws (Q) on
lower poles 2 through pre-drilled holes
(M) inserting the brace on the other side
(P). Then place at the leg of the tram-
poline.
19. Lay the Sleeves (R), the safety net
(S) on the trampoline.
21. Insert the end of the sleeves (R) into
the next one.
25
EN