Publicité
Charging Quest
Charging Method 1
Turn the power switch ON on the side
of the robot. Once your Quest is ready,
press the "dock" button. Robot will find
the docking station and dock itself for
charging.
You may also manually position Quest
on the docking station along the center
line until it clicks into position.
9
1000
TM
Charging Method 2
2
(Step 1) Plug the AC adapter connector
into Quest's DC terminal.
(Step 2) Plug the Adapter into an electric
outlet
™
IMPORTANT: Make sure the power
switch on the side of the robot is ON before
charging. Otherwise, it will not charge.
WARNING
!
When the device is not in use, power off
the machine. This will protect your device
1
WARNING
!
If the device is not in use for extended
period, charge the battery fully and store it
in a cool & dry place to protect battery from
any potential damage.
WARNING
!
Before first use or using it after long period,
charge the battery for about 18-24 hours
to refresh the battery.
!
battery.
!
!
Publicité
