Compatibility - Pioneer SGY-PM900H90 Mode D'emploi

EN
„
Crank sets
The product is compatible with the following crank sets.
Crank sets
SHIMANO FC-9000
* Descriptions in this manual are for a 170 mm crank set.
„
Bottom bracket (BB)
The following bottom brackets are compatible.
Bottom bracket
HOLLOWTECH II, JIS68
* SHIMANO SM-BB9000 is not compatible.
When you use the following bottom brackets, you need the special optional parts (sold separately).
Bottom bracket
BB86
BB30
PF30
This product is designed to be used for recreational cycling and cycle training applications only and is not designed to withstand
racing conditions.
Additionally, this product is designed to be used while cycling on paved roads only. Any damage or malfunction arising from
use in racing or riding on dirt roads, cobblestone or any other unpaved roads will not be covered by the manufacturer's limited
warranty.
Installing, pairing, and calibrating the product requires specialized techniques and tools. Ask the shop where you
bought the product to install, pair, and calibrate it.
Please note that the crank set and bottom bracket may be damaged by mounting the sensors.
4

Compatibility

•
Crank lengths of 165, 167.5, 170, 172.5, 175 mm, crank set of 50-34T, 52-36T, 52-38T, 53-
39T are compatible. *
Names of products
SHIMANO SM-BB7900
SM-BB6700 *
Names of products
Pioneer SGY-BB86
SGY-BB86C
Pioneer SGY-BB30
SGY-BB30C
Pioneer SGY-BBPF30
SGY-BBPF30C
Remarks
Uses magnet ring attachment.
Attaches directly to magnet ring and optional parts (sold separately).
Remarks
Remarks