Maintenance; Support - Kerbl 345000 Mode D'emploi

Operating temperature
Protection type
Dimensions
Control voltage
You can find the circuit diagram at the end of these operating instructions.

12. Maintenance

This is a low-maintenance device. During routine inspections by a qualified electrician, have your LED light control
checked as well. Here, the electrician will check the condition of all terminals (possibly tightening screw terminals)
and the overall condition of components.
Clean the outside of the light control at regular intervals.
If you discover damage to the light control, switch off the power supply. Do not use the light control if it is damaged.
Use a specialist electrical company for repairs, or return the complete control to the manufacturer.
If individual relays do not switch reliably with every switching process, they have reached the end of their service life.
Please have the faulty relay replaced immediately and take the light control out of service during the meantime.

13. Support

If you have any questions about the LED light control or its configuration, please use the LED hotline:
Tel.: +49 8086 933 - 551
Email: lichtplanung@kerbl.com
Declaration of Conformity
Albert KERBL GmbH hereby declares that the product/device described in these instructions complies with the fundamental
requirements and other relevant stipulations of Directive 2004/108/EC and 2006/95/EC. The CE mark confirms compliance
with the Directives of the European Union. The Declaration of Conformity can be viewed by visiting http://www.kerbl.de.
Electrical waste
It is up to the operator to dispose of the device responsibly after its useful life in accordance with local regulations. Consult the relevant
regulations for your country. The device must not be disposed of in household waste. Under the terms of the EU Directive on the
disposal of old electrical and electronic equipment, the device can be taken to local authority-run refuse sites or recycling plants
free of charge, or returned to dealers who offer a returns service. Correct disposal protects the environment and prevents any possible harmful
impacts on humans and the environment.
10 °C–40 °C
IP 65
450 x 300 x 142 mm
12 VDC
44