∙ Do not use the heater in rooms with explosive gas or while
using inflammable solvents or varnish or glues.
∙ If the cordset is damaged and you have to change it, do not do
the job yourselves! Take the product to an after sales autho-
rized repair centre or to a person with similar skill and know-
ledge, in order to avoid any risk of danger.
∙ Do not use this heater close to showers, baths, swimming pools.
∙ The appliance must be positioned so that the plug is always
accessible.
Mounting
Take the electrical part und the bottom plate out of the packaging. Remove the large
plastic nut on the lower part of the electrical part. Insert the round plate, with feet
down, on the device and screw it with the nut.
Safe positioning
∙ The appliance must be used only on a flat, stable surface.
∙ The appliance must be not accessible for persons who are ta-
king a bath or in the shower.
∙ Do not place the cable under a carpet.
∙ Mind that during function the cordset must be always com-
pletely pulled out.
∙ Do not use the device in small spaces when there are people in
the room who are not able to leave the room independently,
unless constant supervision is provided.
9