CDVI SOLARKPW Mode D'emploi page 9

INSTALLATION MANUAL
SOLARKPW-SOLARKPB
Dual Technology Digicode
Code Length
- The user code must be in 4, 5, 6, 7 or 8 digits,
- In direct mode, all the keypad keys can be
used to program a user code except the B key,
- In hexadecimal mode, all the keypad keys
can be used to program a user code
except the A and B key,
- Enter the user code and then B to validate
the code.
Programming
the audible signal
A5
1 beep
Green LED ON
Enter:
- 0 = disable the
keypad beeps
- 1 = Enable the
keypad beeps
1 beep = OK
Green LED ON
4 beeps = Error
Standby :
In waiting, the keyboard is weakly lit and badge
reader is inactive. At the approache of the reader,
the system is activat and light becomes more
intense (beginning of the time delay) and badge
reader becomes operational. The reader returns to
standby mode at the end of the time delay..
/Proximity reader - Wiegand
®
Programming
Master code
A6
1 beep
Green LED ON
Enter:
Enter the new master
code (5 digits)
1 beep = OK
Green LED ON
4 beeps = Error
Enter the master code
twice (12345, default
value)
2 beeps are emitted
Red
LED ON
Programming
reading mode
1 beep
Green LED ON
Enter:
- 0 = Permanent
- 1 = Sleep mode
1 beep = OK
Green LED ON
4 beeps = Error
Press on B
B
twice to exit from
programming
2 beeps are emitted
cdvigroup.com
EN
A7
9