Publicité
Les langues disponibles
Les langues disponibles
Never operate the axle locking button if the
engine is still rotating.
Stand for the Combitool
• Assembly the stand (11) on to the workbench
clamp (12).
• Mount the assembled stand on the side of a
workbench or worktop with a maximum thick-
ness of 60 mm.
• The height of the stand is adjustable. Loosen the
top tube of the stand by turning it anticlockwise.
Draw the tube out to its maximum height and se-
cure it by turning the tube clockwise. The height of
the suspension bracket is adjustable by loosening
the black knob. After adjusting the suspension
bracket to the correct height, retighten the knob.
• Attach the Combitool to the suspension bracket
of the stand; this suspension bracket can be
turned 360°.
Accessories for the Combitool
Always check that the maximum rpm of the accessory
is suitable for the maximum speed of the Combitool.
Grinding stones (Fig. D)
When using a grinding stone the first time, use the
dressing stone to balance it. The dressing stone
can also be used for cleaning the surface or to give
the grinding stone a special shape.
Material
Stone, shell
Steel
Aluminium, brass
Plastic
Felt wheels (Fig. E)
The felt wheels should be screwed on the mandrel.
Material
Steel
Aluminium, brass
Plastic
Sanding bands and disc (Fig. F)
Material
Wood
Steel
WWW.VONROC.COM
High speed cutter, Diamond wheel point and Drill
(Fig. G)
4. MAINTENANCE
Clean the machine casings regularly with a soft
cloth, preferably after each use. Make sure that the
ventilation openings are free of dust and dirt. Re-
move very persistent dirt using a soft cloth moiste-
ned with soapsuds. Do not use any solvents such
as gasoline, alcohol, ammonia, etc. Chemicals such
as these will damage the synthetic components.
ENVIRONMENT
Speed setting
-
+
+ -
Only for EC countries
-
Do not dispose of power tools into domestic waste.
According to the European Guideline 2012/19/EC
for Waste Electrical and Electronic Equipment and its
implementation into national right, power tools that
are no longer usable must be collected separately
Speed setting
and disposed of in an environmentally friendly way.
+
WARRANTY
+ -
+
VONROC products are developed to the highest
quality standards and are guaranteed free of
defects in both materials and workmanship for the
period lawfully stipulated starting from the date of
Speed setting
original purchase. Should the product develop any
+ +
failure during this period due to defective material
and/or workmanship then contact VONROC directly.
-
Aluminium, brass
Plastic
Material
Stone, shell
Steel
Aluminium, brass
Plastic
Make sure that the machine is not live
when carrying out maintenance work on
the motor.
Faulty and/or discarded electrical or
electronic apparatus have to be collected at
the appropriate recycling locations.
EN
+ -
-
Speed setting
Max
+ -
+ +
-
7
Publicité
