Publicité
Les langues disponibles
Les langues disponibles
Instruction for use
1) ON/OFF
Press the power button (3 seconds) when the power is turned off, and the
sound will be displayed "Idance beatboy, Bluetooth mode", and the system
is switched on.Press the power button (3 seconds) when the power is switched
on, and there is a prompt for "power off", and the system is turned off.
Note: use the power button to turn off the power.
2) Bluetooth connection.
For the first time, the product will need to be manually connected to the
Bluetooth. At this point, it will only need to turn on the Bluetooth of the phone
to search for "IDance Beatboy", and then click the connection. When you
hear the "Connected" note from the speaker, it says that it has been paired
successfully. After the first connect, the product will automatically search the
matched Bluetooth device in 3 seconds and connect it.
3) Charging
This product has a built-in rechargeable battery. Please fill it with electricity before
you use it for the first time. Connect one end of the charging cable to the
micro USB slot of the product. One end is connected to the charger of DC 5V
for charging, and the red indicator is on when charging. The charging time
is about 4-5 hours. When full charge, the red indicator is replaced by a
green one.
Note: if you don't use it for a long time, please charge the speaker once every
30 days. The charger is not in the standard range, you can use the standard
cell phone charger to charge the product. The charger is output DC 5V,
and the current is not less than 500MA.
Publicité
