Rockford Fosgate PUNCH PMX-HD9813 Mode D'emploi page 7

THEME
To adjust the THEME, press the encoder to access the feature.
Rotate the encoder button to select the desired THEME (DAY,
NIGHT, AUTO)
REMOTE SETUP FOR OPTIONAL PMX-BTUR
To access the REMOTE SETUP options, press the encoder to
display the different options (HEAD UNIT INFO>PMX-BTUR
SCAN>DISCONNECT>PMX-BTUR INFO> HEAD UNIT RESET).
To pair you PMX-BTUR, press any button on the remote to activate
the device. Then select PMX-BTUR SCAN under the REMOTE
SETUP options. Once it detects the remote, press the encoder
to finish pairing. Refer to the table on page 11 for PMX-BTUR
controls.
CLOCK/DATE
To adjust the CLOCK/DATE, press the encoder to access the
feature. Rotate the encoder button to select CLOCK/DATE options
(CLOCK/DATE SETTING>ALBUM ART DISPLAY).
CLOCK/DATE SETTING
To set the 12H/24H display preference, rotate the encoder to
scroll through the time display options. Press encoder to select
and keep that option.
To adjust the time, rotate the encoder to the correct hour, press
the encoder to lock in hour, repeat for minutes and date.
ALBUM ART DISPLAY
Press the encoder button to select which ALBUM ART DISPLAY
opton you want (OFF>5S>10S>20S>ALWAYS).
FACTORY DEFAULT
AUDIO – Press the encoder button to access. Rotate the encoder
button to select YES/NO. Selecting YES will reset your unit back to
factory default settings.
SYSTEM - Press the encoder button to access. Rotate the encoder
button to select YES/NO. Selecting YES will reset your unit back to
factory default settings.
SiriusXM - Press the encoder button to access. Rotate the encoder
button to select YES/NO. Selecting YES will reset your unit back to
factory default settings.
Basic Operation
TURNING THE UNIT ON / OFF
Press and hold the SRC (Power) button to turn the unit ON or OFF
ADJUSTING THE VOLUME
Rotate encoder knob left or right to desired volume level (0-40).
The current volume level will be displayed during adjustment.
ADJUSTING THE SUBWOOFER OUTPUT
Press the SUB + or SUB- buttons to adjust the output level (0-20).
ADJUSTING THE SCREEN BRIGHTNESS
Press and hold the DIMMER button to adjust the brightness level.
There are two brightness levels.
SELECTING A SOURCE TO PLAY
Press the SRC button to show the different source options (FM
TUNER>AM TUNER>USB>AUX>BLUETOOTH>PANDORA>SiriusXM).
Use the rotary encoder or press the SRC button to scroll through
sources.
Tuner Operation (FM/AM)
To operate, use the rotary encoder to select the tuner source you
want to listen to (FM>AM>WB).
To switch between AUTO and MANUAL SEEK modes, press and
hold either the FWD or REV buttons.
To AUTO SEEK stations, press the FWD and REV buttons. To
MANUAL SEEK stations, press and hold the FWD and REV buttons
to tune to the desired frequency.
To MUTE the TUNER, press the PLAY/PAUSE button.
FM BAND SETTINGS
To access the FM BAND SETTINGS, press the MENU when using
the FM TUNER source. This will give you access to the settings
specific to the FM TUNER (FM>PRESETS>ADD PRESETS>REMOVE
PRESETS>AUTO STORE>LOCAL).
PRESETS
Press the encoder button to access the PRESETS list. Using this
feature allows you to see what PRESETS are saved on the unit.
ADD PRESETS
Press the encoder button on the ADD PRESETS option. You will
need to be on both the station and PRESET group you want to
add first (FM1>FM2>FM3). Using this feature allows you to save
stations to the unit. Once selected, use the rotary encoder to
select the PRESET number (1-6) you want the station saved to.
REMOVE PRESETS
Press the encoder button on the REMOVE PRESETS option. You
will need to be under the PRESET group you want to adjust first
(FM1>FM2>FM3). Using this feature allows you to remove saved
stations on the unit. Once selected, use the rotary encoder to
select the PRESET number (1-6) of the station you want removed.
FM
Press the encoder button to access the FM PRESET options
(FM1>FM2>FM3). Using this feature allows you to have separate
tuner preset groups to choose from. Use the rotary encoder
button to scroll through the TUNER groups and press to select
the group.
AUTO STORE
Press the encoder button to access the AUTO STORE function. You
will need to be under the PRESET group you want to adjust first
(FM1>FM2>FM3). This feature automatically stores presets on the
unit. It will stop when presets 1-6 are set. Select the next PRESET
group and repeat to fill next set.
LOCAL
Press the encoder button to access the LOCAL options. Once
selected, use the rotary encoder to select ON or OFF. The local
option tunes to nearby radio stations with sufficiently strong
7
Settings