Rockford Fosgate PUNCH PMX-HD9813 Mode D'emploi page 6

Settings
Source Unit Settings
To access the source unit's settings, press and hold
the MENU button until the options appear. Rotate the
encoder to scroll through the list of settings and then
press the encoder button to select the setting you wish to
change. (BALANCE>FADER>AUDIO>VOLTAGE GAUGE>BT
PAIRING>BEEP>TUNER REGION>SOFTWARE>THEME>REMOTE
SETUP>CLOCK/DATE>FACTORY DEFAULT)
BALANCE
Press the encoder button to access BALANCE adjustment settings.
Rotate the encoder button to set output BALANCE.
FADER
Press the encoder button to access FADER adjustment settings.
Rotate the encoder button to set output FADER.
AUDIO
To access the AUDIO settings, press the AUDIO option from the
MENU screen. Rotate the encoder to scroll through the list of
settings and then press the encoder button to select the setting
you wish to change. (7 BAND EQ>CROSSOVER>PEQ>REAR
RCA>AUX INPUT>SOURCE GAIN>INTERNAL AMPLIFIER)
7 BAND EQ
Press the encoder button to access the 7 BAND EQ settings. Use
the rotary encoder to scroll through the EQ settings. (FLAT >
ROCK > CLASSIC > ACOUSTIC > DANCE > ELECTRONIC > HIP-HOP
> CUSTOM) When setting up the CUSTOM EQ, press the encoder
button to set the first frequency. Once active, rotate the encoder
to adjust the frequency settings. Press encoder button again
to access the next frequency. Repeat until all EQ settings are
complete. Press the MENU button to exit and go back up one
level.
CROSSOVER
Press to access the CROSSOVER settings. Use the rotary encoder
to select the crossover zone options (FRONT>REAR>SUB).
Press the encoder to adjust the frequency of the crossover
(60Hz>80Hz>120Hz>APF). Press MENU to exit and go back up one
level.
PUNCH EQ
Press to access the PUNCH EQ settings. Use the rotary encoder to
adjust the gain output (0-12). Press MENU to exit and go back up
one level.
Punch EQ is an onboard equalizer with up to +18dB @ 45Hz and/
or up to +12dB boost at 12.5kHz
AUX INPUT
RENAME – To rename AUX, press the encoder button to set the
first letter of the new name. Once active, rotate encoder to select
letters. Press the encoder button again to set the next letter.
Repeat until AUX has been renamed. Press MENU to exit and go
back up one level.
ENABLE - Press the encoder button to access options. Rotate
the encoder button to select if unit is discoverable. (ENABLE >
DISABLE)
SOURCE GAIN
To adjust the level of device input gain, scroll through the inputs
(FM TUNER>AM TUNER>USB>AUX1>AUX2>BLUETOOTH>PANDO
RA>SiriusXM>GLOBAL INPUT) to the device you want to adjust,
press the encoder button to access the gain settings. Rotate the
encoder button to set the level of gain (-3dB > -2dB > -1dB > 0dB >
+1dB > +2dB > +3dB).
Selecting the GLOBAL INPUT option lets you adjust all source
attenuation at once (0dB>-3dB>-6dB>-9dB>-12dB>-15dB>-18dB).
INTERNAL AMPLIFIER
Press to access the INTERNAL AMPLIFIER options. Use the rotary
encoder to select options (ON>OFF). When using an amplifier
to power your speakers, select OFF. If you are powering your
speakers directly from the source unit, select the INTERNAL
AMPLIFIER to ON.
VOLTAGE GAUGE
To display the vehicle voltage, press the encoder button on the
VOLTAGE GAUGE option.
BT DEVICE PAIRING
Press the encoder button to access options (DISCOVERABLE >
DEVICE).
DISCOVERABLE
Rotate the encoder button to select if unit is discoverable for
pairing. (ENABLE > DISABLE) Once enabled, the source unit is now
discoverable and ready for pairing to your mobile device. Open
the Bluetooth settings on your mobile device to find the source
unit labeled "Rockford PMX" and select.
DEVICE
Selecting DEVICE by pressing the encoder button will allow you
to rename the source unit with up to 16 characters. This gives you
the ability to have a unique name for easy identification during
device pairing. Press the encoder button to select the letter to be
changed and rotate the knob to change the value. Repeat process
until desired name is reached.
BEEP
Press the encoder button to access the BEEP options. Rotate the
encoder button to turn system beep ON/ OFF.
TUNER REGION
To adjust, press the encoder button to access. Rotate the encoder
button to select the TUNER REGION of your preference. (EUROPE
> USA > RUSSIA > LATIN > ASIA > JAPAN > MIDEAST > AUSTRALIA)
SOFTWARE
VERSION - Press the encoder button to display the current
firmware version of the unit.
UPDATE - Press the encoder button to update the firmware.
Follow the instructions on the screen when updating.
6