Siriusxm - Rockford Fosgate PUNCH PMX-HD9813 Mode D'emploi

Operation

SiriusXM

® (US and Canada only)
Only SiriusXM brings you more of what you love to listen to,
®
all in one place. Get over 140 channels, including commerical-
free music plus the best sports, news, talk, comedy and
entertainment. Welcome to the world of satellite radio. A
SiriusXM Connect Tuner and Subscription are required. For more
information, visit www.siriusxm.com
ACTIVATING YOUR SiriusXM SUBSCRIPTION
After installing your SiriusXM Connect Tuner and antenna, power
on your source unit and select SiriusXM mode. You should be
able to hear the SiriusXM Preview channel on Channel 1. If you
cannot hear the preview channels, please check the installation
instructions to make sure your SiriusXM Connect Twuner is
properly installed.
After you can hear the Preview channel, tune to Channel 0 to find
the Radio ID of your tuner. In addition, the Radio ID is located on
the bottom of the SiriusXM Connect Tuner and its packaging. You
will need this number to activate your subscription. Write the
number down for reference.
Note: the SiriusXM Radio ID does not include the letters I, O, S or F.
In the USA, you can activate online or by calling SiriusXM Listener
care:
• Visit www.siriusxm.com/activatenow
• Call SiriusXM Listener Care at 1-866-635-2349
For Canadian Subscriptions, please contact:
• Visit www.siriusxm.ca/activatexm
• Call XM Customer Care at 1-877-438-9677
As part of the activation process, the SiriusXM satellites will send
an activation message to your tuner. When your radio detects
that the tuner has received the activation message, your radio
will display: "Subscription Updated". Once subscribed, you can
tune to channels in your subscription plan. Note, the activation
process usually takes 10 to 15 minutes, but may take up to an
hour. Your radio will need to be powered on and receiving the
SiriusXM signal to receive the activation message.
SETTINGS
To access the SiriusXM SETTINGS, press the MENU when using
the SiriusXM source. This will give you access to the settings
specific to SiriusXM (SXM>PRESETS>ADD PRESETS>REMOVE
PRESETS>CHANNELS>CATEGORY).
SiriusXM PRESET BANDS (SXM)
Press the encoder button to access the SiriusXM PRESET options
(SXM1>SXM2>SXM3). Using this feature allows you to have
separate satellite preset groups to choose from. Use the FWD and
REV buttons to scroll through the TUNER groups.
PRESETS
Press the encoder button to access the PRESETS list. Using this
feature allows you to see what PRESETS are saved on the unit.
ADD PRESETS
Press the encoder button on the ADD PRESETS option. You will
need to be on both the channel and PRESET group you want to
add first (SXM1>SXM2>SXM3). Using this feature allows you to
save channels to the unit. Once selected, use the rotary encoder
to select the PRESET number (1-6) you want the channel saved to.
REMOVE PRESETS
Press the encoder button on the REMOVE PRESETS option. You
will need to be under the PRESET group you want to adjust first
(SXM1>SXM2>SXM3). Using this feature allows you to remove
saved channels on the unit. Once selected, use the rotary encoder
to select the PRESET number (1-6) of the channel you want
removed.
CHANNEL
Press the encoder button on the CHANNEL option to select this
feature. This feature displays a complete listing of channels.
CATEGORY
Press the encoder button on the CATEGORY option to select this
feature. This feature allows you to search channels based on their
CATEGORY type.
DIRECT TUNING
Press the encoder button on the DIRECT TUNING option to select
this feature. This feature allows you to directly tune to a channel
if you already know the channel number. Rotate the encoder until
you reach the desired nuumeral and press to enter your selection.
Repeat until the channel number is completed.
PARENTAL CONTROLS
Press the encoder button on the PARENTAL CONTROL option
to select this feature. This feature allows you to easily lock and
unlock channels with mature content. To turn this feature on,
press the encoder on PARENTAL CONTROLS to select. You will be
asked to enter a code to activate it. Enter "1111" for your code.
Once the code is entered correctly, this will give you access to
the PARENTAL CONTROL features (LOCK CHANNELS>CHANGE MY
CODE). Use the encoder knob to scroll through the options and
press to select.
LOCK CHANNELS
Press the encoder button on the LOCK CHANNELS option to select
this feature. This feature allows you to select certain channels
to be locked out for listening. When trying to listen to locked
channels, you will need to enter the correct access code to listen
to them. Use the rotary encoder to input code.
CHANGE MY CODE
Press the encoder button on the CHANGE MY CODE option to reset
the PARENTAL CONTROL access code. Use the rotary encoder to
input the code.
10