BOLERO CF129 Mode D'emploi page 3

Telephone Helpline: 0845 146 2887
Operation
Set a user personal code as follows:-
With the safe door open, the word "Opened" will be displayed.
1. Press '*' and enter a code of between 3 and 6 numerals
2. Press "#" and the Safe Door will lock.
3. The word "Closed" will appear.
To open the safe:-
1. Enter the personal code.
2. The word "OPENED" will be displayed and the safe door will open.
To close the safe:-
1. When the word "OPENED" is displayed, press "#"
2. When the display is blank, enter your personal code
Notes:-
If an incorrect code is entered in error the display will show "E-CODE", press "*" to cancel
If an incorrect code is entered three times, the display will show "HOLD-5" and will lock the keypad
for 5 minutes. After five minutes the correct code can be entered to open or lock the door.
Set the master code as follows:-
Open the Safe with the master code:
1. Press "#" twice, the word "SUPER" will be displayed.
2. Enter the master code, the default code is "000000".
3. The word "OPENED" will be displayed and the safe door will open
To change the master code, the safe door must be opened first.
The word "OPENED" is displayed, press "*" twice, and "PROG" is displayed.
Input the current master code.
Press "#" and the word "CODE" is displayed
Enter a new 6 digit master code
Press "#" and "DONE" will be displayed first, then the new master code will be displayed.
The word "GOOD" will be displayed to confirm the new master code.
Cleaning, Care & Maintenance
The exterior of the Safe can be cleaned by wiping with a damp cloth.
Dust or user debris can be brushed from the interior, or removed using a vacuum cleaner.
43744 - CF129 Laptop Safe.1.indd 3
UK
3
23/12/09 16:09:00