SIMMONS KIDS Little Folks 299777 GBV1 Série Instructions De Montage page 9

Fixed Mobile Assembly (On Some Model)
• Please identify your mobile arm. For fixed mobile arm, follow the
instructions on this page. For Clip-on mobile arm, follow instructions
on next page.
1
• Remove two (2) pre-installed screws from mobile arm.
• Locate the pre-drilled holes on the bassinet frame and
mobile arm over the holes on the bassinet side frame.
2
• Re-insert the screws into the mobile arm. Tighten with screwdriver.
To Remove the Mobile Arm Assembly
•
Please reverse from step two to step one.
Customer Service
Tel. (800) 218-2741
Fixed mobile arm
A
Screws
B
place the
3
Mobile Wire
with Connector
Battery Wire
with Connector
• Lift the fabric on the mobile side of the bassinet and connect the
mobile wire connector into the battery wire connector.
4
• Fit the mobile to the mobile arm. Push the mobile up firmly.
Hint:
To disassemble the mobile for storage, press the tab on the
mobile arm and pull the mobile down.
9
www.SimmonsKidsProducts.com