PROGRAMME SELECTION
AND SPECIAL FUNCTIONS
(Use in conjunction with programme guide)
"ACTION PRO" button
This button allows you to change the wash
intensity, according to how dirty your
dishes are, by adjusting the wash time and
temperature.
The combination of the button with the 4
main wash programmes enables to have 8
additional wash cycles (achieving a total of
12 programmes of washing).
By pressing the "ACTION PRO" button
once (indicator light
wash cycle will be increased and will enable
the wash action of the third cleaning arm,
positioned at the bottom of the dishwasher
("POWER WASH").
This function allows cleaning of heavily
soiled tableware or cookware, by placing
them directly in the area of the basket above
the "POWER WASH".
By pressing the "ACTION PRO"
twice (indicator light
wash cycle will be decreased, reducing the
wash length time.
IMPORTANT
When the dishwasher is switched on,
the last used setting will be indicated.
) the intensity of the
button
) the intensity of the
Programme settings
Open the door and place the dirty dishes
inside the appliance.
Press the "ON/OFF" button
display will show two lines.
Choose a programme by pressing the
"PROGRAMME SELECTION" button.
If you wish, press the "ACTION PRO"
button.
If you wish to select an option, press the
corresponding button (the indicator light
will turn on).
Press the "START" button.
The length of the program will be shown on
the
display
minutes [I.e: 1 h (1 hour) / 25 (25 minutes)].
When the door is shut, after an audible
signal has sounded, the programme will
start automatically. The display will show
the time remaining to the end of the cycle.
"AUTOMATIC" programmes
The dishwasher is equipped with a dirt
sensor, able to analyse water murkiness
during all "AUTOMATIC" programme
phases (see programme list); thanks to
this sensor the washing cycle parameters
are automatically adapted to the real
quantity of dirt on dishes. Thus excellent
washing results are guaranteed while
optimising water and energy consumption.
16
alternating
hours
. The
with