Setup Menu; Setup Menu Overview; Menu Navigation; Installation Settings - Tech Line DVRC 800 Mode D'emploi

DF-H3F12S-RL-W(GB) 2007.9.10 12:52 PM

Setup menu

Setup menu

Setup Menu Overview

The DVD Recorder + VCR Setup menu includes six
categories, including: Installation, Recording Options,
Languages, Preference, System Info and Disc
Options. Press [SETUP] and [... †] on the remote
control unit to view the first and second levels of the
Setup menu.

Menu Navigation

1 Press [SETUP]. The Setup menu appears.
Use [... †] to select the desired category.
2
3 While the desired category is selected, press [√]
to move to the second level.
4 Press [ENTER] to move to the third level.
Use [... †] to select the desired setting, then
5
press [ENTER] to confirm your selection.
Some items require additional steps. Press
[MENU] at any time to return to the previous
menu.
6 Press [SETUP] to exit the Setup menu.

INSTALLATION Settings

Manual Set
To complete the set-up of your DVD Recorder + VCR
when the auto set has not stored all of the channels or
when you wish to store a new channel.
1 Press [SETUP]. The Setup menu appears.
Use [... †] to select 'Installation' and press
2
[ENTER] to confirm.
While 'Installation' is selected, press [... †] to
3
select 'Manual Set'.
Installation
4 Press [ENTER]. The 'Manual Set' menu appears.
Use [... †] to select 'Standard'.
5
20
˘ ` 20 mac001
Manual Set
†
Auto Set
Clock Setting
Adjust Channels
ENTER Confirm MENU Back SETUP Exit
1200DPI 100LPI
Use [œ √] to select the desired 'Standard' (PAL-
6
BG, PAL-II, PAL-DK, or SECAM-L).
Installation > Manual Set
Standard
Reception
Auto Search
Fine Tune
Decoder
Store Channel
Program Name
ENTER Confirm MENU
This set is equipped with the Multi-Tuner. You can
search broadcasting of other countries. If the set
can not search the channels, please Re-Install. (see
page 19.)
Use [... †] to select 'Reception'.
7
Use [œ √] to select the desired broadcast system
8
(Antenna or Cable).
Antenna: If you are using a standard antenna to
receive channels.
Cable TV: If you are using basic cable to receive
channels.
Installation > Manual Set
Standard
Reception
Auto Search
Fine Tune
Decoder
Store Channel
Program Name
Confirm
ENTER MENU
Use [... †] to select 'Auto Search'.
9
10 Search the real channel number by pressing [œ
√].
Installation > Manual Set
Standard
Reception
Auto Search
Fine Tune
Decoder
Store Channel
Program Name
ENTER Confirm MENU
11 Select 'Fine Tune'. You can adjust the fine tuning.
SECAM-L
Antenna
2
0
OFF
PR-1
- - - -
Back SETUP Exit
SECAM-L
Antenna
2
0
OFF
PR-1
- - - -
Back Exit
SETUP
SECAM-L
Antenna
2
0
OFF
PR-1
- - - -
Back SETUP Exit