Impermissible Operating Modes; General Aspects; Affiliation; Inquiries And Purchase Orders - SFA SANIFOS 1600 Mode D'emploi

safety. The use of other parts may results in the loss of liability for the consequences that may occur.

1.8 Impermissible operating modes

The operational safety of the machine supplied is ensured only when used as intended according
to Section 2 - General aspects of the operating instructions. The threshold values indicated in the
data sheet must by no means be exceeded.

2. GENERAL ASPECTS

2.1 Affiliation

These operating instructions are valid for the packaged pumping station SANIFOS
In case of non-observation to the operating instructions - in particular the
safety instructions - as well as unauthorised modification of the device or the
installation of non-original spare parts the warranty claims will automati-
cally become void. The manufacturer assumes no liability for any damage
resulting from this!
Construction sizes:
SANIFOS - shaft installations for single or double system
®
Pumps with a pressure outlet of 2" and a performance of up to approx. 4 kW can be used.

2.2 Inquiries and purchase orders

Please send your inquiries and orders to your specialist dealer.

2.3 Technical data

Clear width
Maximum outer diameter approximately
Shaft heights
Height of the
H2
H3
H5
Specifications
Opening of the shaft cover
Weight
Inlet
Inlet depth
Pressure connection
Pressure connection depth
6
Height with top
basic body piece and BEGU
cover Class A
1600 1730-1960
2100 2230-2460
3100 3230-3460
Ø 625 mm
60 kg - 90 kg (without mounting parts)
suitable for PVC-KG DN 150
675 mm (middle of pipe) from lower edge of shaft bottom
PE HD DN 50 da= 63 mm
675 mm (middle of pipe) from lower edge of shaft bottom
1000 mm
1100 mm
Height with top
piece and BEGU
cover Class B
1775-2005
2275-2505
3275-3505
1600, 2100, 3100.
®
Height with top
piece and BEGU
cover Class D
1810-2040
2310-2540
3310-3540