Aux Volume Control; Microphone Volume Control - Alecto MPA-77BT Mode D'emploi

AUX VOLUME CONTROL:

- Jack 3.5 mm is a stereo input.
- Cinch, RCA or tulip input.
It's recommended to use the jack input or cinch input separately. When using both
inputs simultaneously, the sound can become distorted. Use the "MP3/AUX" vol-
ume control to adjust the volume of these inputs. Don't forget to keep the master
volume control somewhat open, otherwise you won't hear anything.

MICROPHONE VOLUME CONTROL:

You may connect two external microphones or electric instruments with cables to
the "MIC 1" (XLR balanced) and "MIC 2/GUITAR" (6.3mm stereo jack balanced)
inputs. It's recommended to use the Jack input or XLR input separately. Use the
"MIC GAIN." volume control to adjust the volume.
Don't forget to keep the master volume control somewhat opened, otherwise you
won't hear anything.
LOW: Use this control to adjust the low tones level.
MID: This control allows you to adjust the middle intensity.
HIGH: Use this control to adjust the high tones level.
32