Publicité
Les langues disponibles
Les langues disponibles
Manual
General:
With this newly developed accessory, suitable in combination with the digital instruments and sensors
not only the actual measurement may be shown on the
measurement's result can be displayed as well, provided two signal sources are available.
Scope of delivery:
•
The standard scope of delivery consists of:
•
1 Active remote module (Dimensions: ca. 72 x 44 x 20 mm) with integrated support for easy
placement on a surface.
•
1 Bracket for fastening the
(Minilevel NT, Leveltronic NT)
•
1 Cable short (0.2 m)
•
1 Cable long (2.5 m)
Accessories are available upon request, such as e.g.:
•
Mains adapter for external power supply
•
Special cable to connect to OUT-port of Levelmeter 2000
Function:
The
Remote Display
power of one of the instruments connected (e.g. Minilevel NT or Leveltronic NT with batteries
installed) or by an additional external mains adapter, when connected to a Levelmeter 2000 or to a
Type 3 Zerotronic sensor.
The
Remote Display
may be used as signal input or as power supply input.
Display:
If on both sides a signal input is connected, then the instrument will automatically display the
mathematical difference between the two signals. The display format is always identical to the one of
the connected measuring instruments.
When a Zerotronic sensor (Type 3) is connected to one side and the power supply on the other side
the display will always be in radian.
Remote Display
needs a power supply. This power supply can either be through the battery
has two connection possibilities one on each side of the housing. Both inlets
Remote Display
to an inclinometer of the NT generation
Page 5 of 10 pages
but a differential
Publicité
