Gps Info Page - Garmin StreetPilot 2720 Manuel D'utilisation

GPS Info Page

From the map or Main menu, touch the signal strength
bars in the upper-left corner of the screen to view the
GPS Info page. Or, from the Main menu, touch
gps info.
Sky view
Satellite signal
strength bars
The sky view shows the satellites you are receiving. The
satellite signal strength bars indicate the strength of each
satellite signal. A solid bar indicates your StreetPilot has
a strong fix on that GPS satellite, and the GPS satellite is
ready for use.
For more information about GPS, see
.garmin.com/aboutGPS/.
StreetPilot 2720 Owner's Manual
GPS Settings
From the Main menu, touch
You can also access the GPS Settings by touching the
gps settings
tools
>
use indoors—touch
and use the unit indoors.
set position—if Use Indoors is enabled, you can select
a location on the map as your current location (position).
Touch
Waas/egnos—disable and enable WAAS/EGNOS.
Wide Area Augmentation System (WAAS) and Euro
Geostationary Navigation Overlay Service (EGNOS)
are systems of satellites and ground stations that provide
GPS signal corrections, giving you even better position
accuracy.
http://www
To learn about WAAS and EGNOS, visit
.garmin.com/aboutGPS/waas.html.
V
ieWinG the
settings
button on the GPS Info page.
yes
to turn the GPS receiver off
oK after you select your location.
M U t
aP and sinG the ooLs
> general > gps.
http://www
EN-