Installing The Unit On Steering Wheel - Pioneer DEX-P99RS Manuel D'installation

Installation
Installing the unit on steering
wheel
1. Hook the belt on to the holder.
2. Fix the holder to the inside edge of
the steering wheel so that the holder
is facing the driver.
1 Wrap the belt around the outside edge
of the steering wheel, passing the end
through the slot in the holder.
2 Pull on the belt to tighten it then secure it
using the other two hooks on the holder.
3. Cut off the extra portion of the belt.
3
4. Install the remote control unit in the
holder.
Before installing, confirm lock lever is at the
position of marking.
5. Slide the lock lever on the other side
of the remote control until it clicks,
and the remote control is fixed.
lock lever
marking
13