SilverCrest SSOT 6 B2 Mode D'emploi page 78

Operation
7. Briefl y press the "EAR" button
appear in the LC display
will start after an acoustic signal.
8. The end of the measurement is indicated by means of
2 acoustic signals.
9. Now you can read off the measurement result on the
LC display
will come on.
Note: LED green
(93.2 °F - 99.4 °F)
LED orange
37.5 °C - 37.9 °C (99.5 °F - 100.3 °F)
LED red
5
(100.4 °F - 109.2 °F)
10. Values can be displayed in °C as well as in °F
(see "Functions / error analysis - selecting the
temperature unit").
11. Wait until the display "
start taking a new measurement.
Note: The appliance automatically switches off if it is not
operated for longer than 1 minute. When the sleep mode
has been activated, the LC display
When the sleep mode has been deactivated, the appliance
switches to standard mode. If the thermometer has been
operated under normal conditions, the result of the last
measurement taken before the appliance was switched off
is stored. The measured value is available again along
with information on the date, time and measurement mode
78 GB
. At the same time, one of the 3 LEDs
4
: no fever 34.0 °C - 37.4 °C
7
: slight increase in temperature
6
: fever 38.0 °C - 42.9 °C
. The symbol
2
and the measurement
4
" goes out before you
switches itself off .
4
will