Bering BEXP05i Manuel D'installation Et D'utilisation page 33

7.4.3 and
Lock / Unlock the display:
Hold and
Water temperature setting:
Press or
Parameter checking:
Press first, then press
Code
d0 IPM mould temperature
d1 Inlet water temp.
d2 Outlet water temp.
d3 Ambient temp.
d4 Frequency limitation code
d5 Piping temp.
d6 Gas Dischargetemperature
d7 Step of EEV
d8 Compressor running frequency
d9 Compressor current
d10 Current fan speed
d11 Error code for last time
Remark: d4: Frequency limitation code,
1: Coil pipe temperature limit,
4: Drive Current frequency limit,
16: Drive high temperature frequency limit.
button
for 5 seconds to lock/unlock the display.
to set the water temperature directly.
to check the " User parameter from d0 to d11
Condition Scope
0-120℃
-9℃～99℃
-9℃～99℃
-30℃～70℃
0,1,2,4,8,16
-30℃～70℃
0℃～C5℃ (125℃)
0～99
0～99Hz
0～30A
0-1200 （rpm）
All error code
0: No frequency limit,
2: Overheating or overcooling frequency limit,
8: Drive voltage frequency limit,
29
Remark
Real testing value
Real testing value
Real testing value
Real testing value
Real testing value
Real testing value
Real testing value
N*5
Real testing value
Real testing value
Real testing value