Table Des Matières - Bering BEXP05i Manuel D'installation Et D'utilisation

INDEX
Thank you for using BERING swimming pool heat pump for your pool heating, it will heat your pool
water and keep the constant temperature when the air ambient temperature is at -7 to 43℃.
WARNING:
Important notice:

Please always keep the heat pump in a well ventilated place and away from anything which could cause fire.
 Do not braze or weld the pipe if there is refrigerant inside machine. Please do not charge the gas when in a
confined space.
 Please always empty the water in heat pump during winter time or when the ambient temperature drops below
0℃, or else the Titanium exchanger will be damaged because of being frozen, in such case, your warranty will be
lost.

Please always cut the power supply if you want to open the cabinet to reach inside the heat pump.

Please keep the display controller in a dry area to protect the display controller from being damaged by humidity.

Action of filling gas must be conducted by professional with R32 operating license.
 Please fill the R32 gas from the globe valve inside machine.
1. Description
2. Transport information
3. Specifications
4. Accessories and options
5. Location and connection
6. Electrical Wiring
7. Start-up of the Heat Pump
8. Troubleshooting
9. Exploded Diagram
Maintenance
10.
10