Table des Matières
Publicité
21.1.7 T
"rr" is the MIDI note number of the according Pad/Trigger
NRPN
40rrH
41rrH
42rrH
43rrH
44rrH
45rrH
46rrH
47rrH
48rrH
49rrH
4ArrH
4CrrH
4DrrH
4ErrH
4FrrH
50rrH
51rrH
*Positional Sensing: SAM5916 sends MIDI Controller CC#16 with value 0 (Center) till 127 (Outer).
**Hihat Pedal curve is select when sending NRPN 0x4C2C ("rr" = 0x2C = "HH Chick" note)
*** Parameter available for Bell only in case of "3-Way" mode selected
142 I G5 - MANUEL D'UTILISATION
S
RIGGER
ETTINGS
Description
Trigger Bank Preset # 0..maxNB (max number of presets depends on factory Trigger
Bank)
Head/Rim resp. Bow/Edge/Bell*** Gain 0..8
Head/Rim resp. Bow/Edge/Bell Threshold 1..127
Head/Rim resp. Bow/Edge X-Talk 0..7
Head/Rim resp. Bow/Edge/Bell*** High Level 8..127
Hihat Pedal Low Position 0..127
Hihat Pedal High Position 0..127
Head/Rim resp. Bow/Edge/Bell*** Scan Time 10..100
Head/Rim resp. Bow/Edge/Bell*** Retrigger Mask 1..127
Trigger Type Head/Bow :1 = Single, 2 = Dual, 3 = "3-way" , Rim/Edge: 0 = Piezo, 1 =
Switch
Positional Sensing* 0 = OFF, else ON
Curve preset # ** 0..15
Hihat Pedal Chick Sensitivity 0..127
Hihat Pedal Splash Sensitivity 0..127
Trigger Bank Preset parameter transfer end marker
Head/Rim Dyn Level 0..15
Head/Rim Dyn Time 0..15 (corresponds to 0-60ms decay time)
E
NRPN C
DIT
ONTROLS
Publicité
Table des Matières
