Publicité
Les langues disponibles
Les langues disponibles
WAVEFORMS (CONTINUED)
Diadynamic Waveforms
Advice on size and type of electrodes to be used is given in device GUI "treatment
guidelines" feature
The Diadynamic waveforms are rectified alternating currents. The
alternating current is modified (rectified) to allow the current to
flow in one direction only.
Output Mode
Available on channels
Treatment Time
Mode Selection
Output Intensity
MF (Monophasé Fixe) - Frequency of 50 Hz:
phase duration of 10 ms followed by a pause of 10 ms.
IRMS [mA]
DF -
Frequency of 100 Hz: phase duration of 10 ms
CP -
1 second of MF followed abruptly by 1 second of DF.
LP -
Rhythmical fluctuation between 2 MF currents.
CP-iso -
A combination of MF and DF waveforms. CP-id: Same as CP-iso.
IRMS
DC component
IFC Premodulated (Traditional 2 Pole)
Advice on size and type of electrodes to be used is given in device GUI
"treatment guidelines" feature
Premodulated Current is a medium frequency waveform. Current
comes out of one channel (two electrodes). The current intensity is
modulated: it increases and decreases at a regular frequency (the
Amplitude Modulation Frequency).
Electrodes
1, 2
Output Mode
1-60 min
Available on Channel
CC
Treatment Time (STIM)
0- 60 mA
Treatment Time (COMBO)
Mode Selection
Output Intensity
0-33 mA
Beat Fixed (Sweep Off)
Cycle Time
Frequency
Sweep Low Beat Frequency
Sweep High Beat Frequency
IRMS
DC component
0-47mA
Yes
E N
Electrodes
1-60 Min
1-30 Min
CC or CV
0-100 mA (CC) 0-100 V (CV)) Carrier
1-200 Hz
Continuous or User Defined
2,000-10,000 Hz
1- 199 Hz
2-200 Hz
0-55mA
1, 2
No
25
Publicité
