Medisana SAC Mode D'emploi page 18

GB
2 Operation
Use the buttons or to choose between radio (FM) or sound and
confirm your choice by pressing the Set button again.
If you have selected radio (FM) you can use the buttons or to
choose a radio station with which you would like to be woken up. Again,
confirm your selection with the Set button .
If you have selected sounds of nature, you can use the buttons or
to choose between eight different sounds of nature whereby you hear the
sound briefly and a pictogram appears on the display. Again, confirm your
selection with the Set button .
The setting for the volume follows. On the display the digits under the
icon reflect the set volume. Use the buttons or to set the desired
volume. Press the Set button again to confirm your entry. You can now
set the brightness here. On the display the digits under the icon reflect the
set brightness. Use the buttons or to set the desired brightness.
Confirm your selection with the Set button again. If you need only light or
sound function, set the other at 0.
If you did not press buttons for 10s during setting, it will quit all setting auto-
matically.
After making and confirming your choice, you still need to press the Alarm
button Zizz button if you wish to activate the function.
The time, RDS OFF and the preset alarm time will then appear in the display.
Proceed in the same way to set up alarm 2 (AL2) or Zizz (shot-Time alarm).
If an alarm is activated, the buttons for radio , light and relax are
not available.
Sound/Radio button
If you press the Sound/Radio button once, the Sound icon appears, the
broadcast signal blinks also. Use or to select the sound of your
▼ or ▲ to set the desired volume.
choice. Use the buttons
If you press the Sound/Radio button a second time, the Radio (FM) icon
appears, the broadcast signal blinks also. Use the buttons or to
▼ or ▲ to set the desired
choose a radio station. Use the buttons
volume. To press the Sound/Radio button the third time or Off button
to quit.
Dimmer button
If you press the Dimmer button the display lights up and changes from
High green – Low green – High yellow – Low yellow - off. Press the Dimmer
button at your brightness and light colour of choice to make your selection.
12