Publicité
Les langues disponibles
Les langues disponibles
Installation Instructions – Junction Box Structure Interface (Connection at Ceiling) Aircraft Cable
INSTALLATION
Mount Details
1/4-20 Stud
to Structure
(By Others)
1/4-20
Coupler
Crossbar
Aircraft
Cable
5''
Canopy
Strain
Relief
Figure 1.
Power
Connection at Ceiling
1.
Layout mounting locations. (Figure 1.)
2.
Ensure that power feed is at the UL end of the fixture.
N
otee:
Power feed: to be installed to local/national
electrical codes by a Certified Electrician.
3.
Secure junction box and 1/4-20 stud to structure.
4.
Secure crossbar to junction box.
5.
Feed power cables through canopy and install strain
relief.
6.
Connect power cable in junction box, ensuring all
connections are properly matched.
7 .
Place canopy over junction box & fasten with 1/4-20
pan head screw.
8.
Install 1/4-20 coupler with aircraft cable to 1/4-20 stud.
Aircraft Cables Sit in .368'' from the End of the Fixture
Mounting Points Equal Fixture
Lengths 4', 8' or 12'
Power Feed
Figure 7.
Mounts Locations
Installation Instructions – Junction Box Structure Interface (Connection at Ceiling) Aircraft Cable Mounting - AC-_-ST
4'' Octagonal J-Box
and Appropriate
Hardware to
Structure (By Others)
Crossbar with
1/4-20 Thread
1/4-20 Pan Head
Screw
First Section
ADE141261
Structure
2'' Canopy
(Not Provided Standard)
Figure 2.
Non-Power
Figure 3.
Power (2-D)
Figure 5.
Options
Figure 6.
Mounting Points Equal Fixture
Lengths 4', 8' or 12'
*Consecutive Section
*For Continuous Rows See Joining Sheet
www.cooperlighting.com
Mounting - AC-_-ST
1/4-20 Stud to
Structure (by Others)
Figure 4.
Non-Power (2-D)
Curly Cord (AK):
SJT - 18/3 or
SJT - 18/4
Curly Cord
Power Mount
Option with AC48
3
Publicité
