Cooper Corelite ADE141261 Instructions D'installation page 2

Installation Instructions – Junction Box Structure Interface (Connection at Ceiling) Aircraft Cable
Mounting - AC-_-ST
IMPORTANT SAFETY INFORMATION - READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION
Before starting any work ensure that all sources of power are turned OFF . All work must meet local/national electrical
● ●
codes and be performed by a certified electrician.
Follow product label information and instructions before installing fixture. Retain installation instructions for future
● ●
reference.
Risk of fire, electrical shock, cuts and or other casualty hazards. This product must be installed in accordance with the
● ●
applicable installation code by a person familiar with the construction and operation of the product and the hazards
involved. Cooper Lighting Solutions assumes no responsibility for claims brought about by improper or careless
installation or handling of this product.
Risk of burn. Disconnect power and allow fixture to cool before changing bulb or handling fixture.
● ●
Replace lamp only with correct wattage and type of lamp marked on label. DO NOT exceed the maximum wattage listed
● ●
on the fixture label.
To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or any sharp objects.
● ●
If supply wires are located within 3 inches of driver/ballast, use wire rated for at least 90°C (194°F).
Note: Not all option available. Please consult your Cooper Lighting Solutions representative for availability. Specification and
dimension subject to change without notice.
Installation Instructions – Junction Box Structure Interface (Connection at Ceiling) Aircraft Cable Mounting - AC-_-ST
2
WARNING
INSTRUCTIONS.
NOTICE
ADE141261 www.cooperlighting.com