Attaching And Removing The Acoustic Accessories; Functions Of The Accessories - Sigel Sound Balance Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19
5

Attaching and removing the acoustic accessories

5.1

Functions of the accessories

Warning
`
`
There is a concealed metal plate inside the top of the acoustic elements. The acoustic accesso-
ries are simply attached to the element with their integrated SuperDym magnets.
The accessories can be attached and removed as required.
Each acoustic accessory can be used in combination with the acoustic board, the acoustic wall
and the acoustic tower.
Flipchart hooks
The flipchart hooks are suitable for attaching standard flipchart pads.
Warning
`
Storage box
The storage box serves as a shelf for small items such as writing materials, sticky notes, etc., and
is ideal for combining with the writing panel.
Writing panel
The writing panel is ideal for use with SIGEL whiteboard markers. The writing panel can be wet or
dry erased. Please refer to section 6.1 "Cleaning".
Fig. 2 Acoustic accessories for your SIGEL Sound Balance acoustic elements
Fig. 3 Flipchart hooks
Sound Balance acoustic accessories
Only use the acoustic accessories when securely attached to a SIGEL acoustic
element.
Removed the accessory before moving the acoustic element.
When using a flipchart pad on an acoustic product, please ensure that the ink in
your pen does not bleed through the paper. As a precaution, do not use the flip-
chart pad down to the last sheet, but replace it with a new one when there are 3-5
sheets left. This will ensure that the ink does not bleed through the paper and stain
the surface of your acoustic products.
Fig. 4 Storage box
Fig. 5 Writing panel
15

Publicité

Table des Matières
loading

Table des Matières