Delta 46-455 Manuel D'instructions page 13

STARTING AND STOPPING LATHE
To reduce the risk of injury, make sure
that the ON/OFF switch is in the "OFF" position before
metal prongs when unplugging or plugging in the
cord.
LOCKING SWITCH IN THE "OFF" POSITION
To reduce the risk of injury, in the event
of a power outage (such as a breaker or fuse trip),
always move the switch to the "OFF" position until
the main power is restored.
IMPORTANT:
MOTOR OVERLOAD PROTECTOR
JJ
Fig. 22
KK
Fig. 23
LL
Fig. 24