gra ES 80 Mode D'emploi page 45

Espresso Machine ES 80 / ES 81
The unit will then automa-
tically power on and begin
heating up.
The unit will stay in pro-
gramming mode for up to
30 seconds. If you do not se-
lect a new temperature set-
ting within 30 seconds the
programm will automatically
return to the Factory Setting
and the unit will the power
on and begin heating up.
Factory Reset
To undo any changes made to the
program you can revert back to
the original factory settings.
This resist ALL the programm
settings back to factory settings,
including the espresso and steam
thermoblock temperatures and
the steam pump rate.
Repairing faults
Safety instructions
CAUTION
Follow the safety instructions below to prevent hazards and
property damage:
►
Causes of faults and how to repair
Only electricians trained by the manufacturer are autho-
rised to repair electrical units. Improper repairs can lead
to extreme hazards for the user and damage the unit.
© Gebr. Graef GmbH & Co. KG - 03
Rest Mode
1. The Machine is on READY
mode.
2. Press and hold down the "PO-
WER" button for 3 seconds.
3. Release the "POWER" button.
EN
45