Using The Device - SC iKonn 220 Mode D'emploi

48
SC iKonn 220 - Using the Device
Notes for Commissioning
Fully charge the two necessary and replaceable 18650 batteries before first use� Please ensure that you use a
high-quality brand� Please note the positive and negative poles in the battery compartment� Ensure that there is
no visible damage to the surface of the battery cells� The device has a 510-pin connection with a spring-loaded
connector, making it suitable for a variety of sub-ohm-capable clearomizers�
Slide the battery cover upwards to open it and insert two high-current 18650 batteries into the device� Slide the
battery cover back down�
Note for Cleaning
Use a dry cloth or cotton swab to clean the clearomizer�
Power On/Off
Press the Fire button quickly 5 times to turn the unit on� Turn the device off in the same fashion, by pressing the
Fire button quickly 5 times� We recommend that you turn the device off during transport and when the device will
not be used for long periods of time�
Vaping
While holding the fire button of your e-cigarette, inhale the vapor slowly and continuously through the mouth-
piece of your clearomizer� Release the fire button while exhaling the vapor�