Using The Device - SC Invoke Manuel De L'utilisateur

54
SC Invoke – Using the Device
Notes on Using the Device for the First Time
Fully charge the required replaceable 18650 battery cells before first use� Please note the positive and negative
poles in the battery compartment� Ensure that there is no visible damage to the surface of the battery cells�
The device has a 510-pin connection, making it suitable for a variety of sub-ohm-capable clearomizers�
Charging and updating the device
You can charge the device with a USB cable by connecting it to a PC, a wall outlet adaptor, or to an external device
into which you insert the batteries� The battery levels of both battery cells can be individually read on the display�
The firmware can be updated by connecting the device to an Internet-enabled PC and downloading the software�
Instructions for Cleaning
Use a dry cloth or cotton swab to clean the device�
Power On/Off
Press the Fire button quickly 5 times to turn the unit on� Turn the device off in the same fashion, by pressing the
Fire button quickly 5 times� We recommend that you turn the device off during transport and when the device will
not be used for long periods of time�