SC iKonn 220 Mode D'emploi page 51

49
SC iKonn 220 - Using the Device
Display On/Off
Press and hold the Fire and Down buttons simultaneously while the power is on to switch between Stealth-On and
Stealth-Off modes� In stealth-on mode, you can vape with the OLED screen off� Press the Fire button to show your
current settings briefly in Stealth-On mode�
Rotate the Display
Press and hold both setting buttons simultaneously for two seconds while the power is off� The display will rotate
180 degrees� This function allows you to view your settings from two different perspectives�
Lock/Unlock the Up and Down Buttons
Press and hold the "Up" and "Down" buttons simultaneously for two seconds while the power is on, until LOCK
appears on the display� The setting buttons are now locked� To unlock them, press and hold the buttons for an ad-
ditional two seconds, until UNLOCK appears on the display� This function prevents you from accidentally changing
your vaping settings�
Setting the Preheat Function
Press and hold the Fire and Up buttons simultaneously while the power is off, until the M1 mode appears� After
pressing the Fire button 3 times, POWER will appear on the display� Press the setting button "Up" or "Down" to
specify the wattage to which the atomizer head should be preheated� Press the Fire button again� TIME will appear
on the display� Press the setting button "Up" or "Down" to set the desired preheating time in seconds or to switch
off the preheating function�