LENCO PDR-020 Mode D'emploi page 8

Alarm Setting
Press the Enter/Snooze to use Alarn 1 or press NEXT to access Alarm2.
Press the Next button so the word "ON" is flashing and press Enter to confirm.
The hour digits for the alarm will flash, press the Prev or Next to change the hour and press the Enter
button to confirm.
Press the Prev or Next button to change the minute and press the Enter button to confirm.
Press the Prev or Next button to change the volume and press the Enter button to confirm.
Press the Prev or Next button to change between Alarm-DAB-FM and press the Enter to confirm.
To set the Alarm 2, follow the Alarm 1 instructions.
Note: You can press the Info/Menu button to get back last one step when in the process of setting the
alarm.
Turn off the alarm
To turn off the alarm, press the Next button so the word "OFF" is flashing and press Enter button. The
alarm is now OFF.
Turn off the alarm when sounding
Press the Power/Mode button to turn off the alarm when sounding.
Note: The alarm will keep ringing for one hour if you do not turn it off when it is sounding.
Sleep Setting
Press the Prev or Next button to select either OFF-120-90-60-45-30-15-5 minutes.
Press the Enter button to confirm your selection.
Factory Reset
Press the Enter button and the display will show "Factory Reset?". Press the Next or Prev to select
"Yes".
Press the Enter button again and will reset the radio.
FM Scan Set
Press the Enter button to select Only or All. If select Only, the radio only scan the strong signal station
and play. If select All, the radio will also scan the weak signal station and play.
System Version
You can check the software version number.
Resetting the radio
Resetting the radio will delete all the tuned DAB stations and all the preset memory stations in FM and
DAB modes.To reset the radio:
Press and hold the INFO/MENU button.
Press the Next button repeatedly until "Factory Reset" is displayed on the screen.
8