Quick Start Guide - nedis SPBB320BK Mode D'emploi

a

Quick start guide

Bluetooth Boombox
For more information see the extended manual
online: ned.is/spbb320bk
Intended use
This product is intended to stream audio from your media device
via Bluetooth, audio cable or from a USB flash drive.
The product is not intended for professional use.
Consult the local laws and regulations for this product before
installing and using.
Any modification of the product may have consequences for safety,
warranty and proper functioning.
Main parts (image A)
1
Battery indicator LED
2
Press and hold to decrease volume.
Press to skip to the beginning of the track.
Double press to skip to the previous track.
3
Press and hold to increase volume.
Press to skip to the next track.
4
Play or pause the music.
5
Press to switch between Bluetooth, USB and AUX.
6
True Wireless Stereo (TWS) button
7
Power button
8
USB port
9
Micro USB charging port
10
Aux port (3.5) mm
11
USB charging cable
12
3.5 mm audio cable
Safety instructions
WARNING
-
• Only use the product as described in this manual.
• Do not use the product if a part is damaged or defective.
Replace a damaged or defective device immediately.
•
Disconnect the product from the electrical outlet and other
equipment if problems occur.
• Do not expose the product to water or moisture.
• Replace a damaged or defective product immediately.
•
Do not immerse the product in water.
•
Do not charge when the product is wet.
•
Do not leave a battery on prolonged charge when not in use.
• Do not dismantle, open or shred batteries.
• Do not drop the product and avoid bumping.
•
This product may only be serviced by a qualified technician for
maintenance to reduce the risk of electric shock.
•
Do not expose the product to direct sunlight, naked flames or
heat.
• The handle is exclusively intended to carry the weight of the
product.
•
Charging the product
SPBB320BK
1. Plug A
2. Plug the other end of A
3. Plug the USB adapter into a power outlet.
Pairing the product to Bluetooth audio source
1. Press and hold A
The LED blinks quickly to indicate pairing mode is active.
2. Activate Bluetooth on your audio source and connect with the
The LED stops blinking to indicate pairing is succesful.
Connecting with audio cable
1. Plug A
2. Plug the other end of A
4
Playing music from a USB or microSD flash
drive
1. Insert a USB flash drive in A
4
4
4
Pairing two speakers with TWS
4
1. Switch on both speakers and set them to Bluetooth mode with
2. Press A
The product emits a tone to indicate entering pairing mode.
3. Activate Bluetooth on your audio source and connect with the
The product emits three tones and A
pairing is successful.
Activating voice assistant
1. Set the product to Bluetooth mode.
2. Press and hold A
Specifications
Product
Article number
Dimensions (d x w x h)
Weight
Features
RMS audio output
Peak audio output
4
Retain the original product literature for future reference.
w 9
into A
.
w
into a 5V/1A USB adapter (not
provided).
7
to switch on the product.
product (SPBB320BK).
e q
into A .
e
into your audio source.
Playing music without Bluetooth disconnects Bluetooth. Press
5
A
until the product is in Bluetooth mode to connect to your
Bluetooth audio source again.
8
Music from your USB flash drive plays automatically.
2 3
Press A and A to skip between tracks.
4
Press A to play or pause music.
TWS only works with two speakers of the same type.
5
A .
6
on one of the speakers for 4 seconds.
product.
4
to activate voice assistant.
.
6
lights up to indicate
Bluetooth Boombox
SPBB320BK
140 x 370 x 190 mm
2.6 kg
True Wireless Stereo (TWS)
2 x 22 W
90 W