Tokai TCP-124 Manuel D'utilisation page 15

DISPLAY DESCRIPTION AND INDICATORS
STANDBY Indicator
PM Indicator
ALARM 1 Indicator
BASIC OPERATIONS
TIME AND CALENDAR MANUAL SETTING
Setting Time and Calendar
Press SET (7) button in standby mode and keep depress over 2
seconds to enter time set mode, after enter the setting mode, press
SET button (7) to change the mode cycle as follows :
Normal g Year g Month g Day g 12/24 H format g Real time Hour
g Real time Min g Normal
Action (during data adjustment):
- Press << / Tune - button (8) to adjust data backward.
- Press >> / Tune + button (12) to adjust data forward.
- Keep depressed << or >> button for 2 seconds to enable auto
forward.
- Use SET (7) button to confirm each setting.
ALARM SETTING
Setting Alarm 1 and Alarm 2
In standby mode, press the ALARM 1 (9) or ALARM 2 (13) button
once to preview the alarm time.
The alarm time is displayed, press & hold the AL1 / AL2 button for 3
seconds and the hours will blink. Press AL1 / AL2 button (9/13) and
keep depress over 2 seconds to enter alarm set mode. Once in the
setting mode, press alarm set button (9/13) to change the mode cycle
as follows:
TIME Indicator
15
MHz Indicator
ALARM 2 Indicator