Contents Of The Packaging; Description Of The Ups; Front View - Riello Net Dialog NDG 800 Manuel D'utilisateur

CONTENTS OF THE PACKAGING

 UPS
 # 1 UPS IEC-Shuko power cable
 # 2 IEC-IEC output cables
 # 1 9 pin serial cable
 # 1 telephone extension cable
 # 1 software download card
 # 1 User Manual

DESCRIPTION OF THE UPS

Front View

1. "Line active" LED (green)
steady light: the mains power is on (the UPS is operating off mains power supply)
2. "Battery Mode" LED (yellow)
flashing (5 second): the UPS is operating in battery mode.
flashing (1 second): the batteries are running low or the software shutdown command has been
3. "Battery failure" LED (red)
flashing (1/2 second): the batteries must be replaced
4. "Overload" LED (red)
steady light: the UPS has failed
flashing (1 second): an overload has occurred
5. "ON/OFF" Button
Use this button to turn the UPS on and off.
N.B.: The UPS can be switched on even if there is no power supply.
6. "Silence" Button
When operating in battery mode, pressing this button for at least one second can silence the UPS
alarms.
1
2
5
activated.
- 27 -
4
3
6