Stopping the appliance
Set thermostat control knob (n°1 on picture) on 0: the appliance is no longer
functioning.
Disconnect the power cable.
Clean the appliance. (see 6. Cleaning)
d) Breakdown / repair:
In case of breakdown or of damaged part, please call your after-sales service and
confide any technical operation to qualified person.
When you contact the after-sales service of your distributor or your store, give him
the complete reference of your device (commercial name, type and serial number).
This information appears on the visible descriptive plate behind the device.
6. CLEANING AND MAINTENANCE
Disconnect the device.
- Let cool completely the device before any technical intervention or cleaning.
- Only use non-abrasive products, clean regularly the external walls of your device
with warm water and wash liquid: avoid the abrasive towelling. Rinse your device
with a wet sponge.
It is advisable to clean the container after each use to guarantee its long life dura-
-
tion and to prevent unsightly scale from forming.
- To clean the tray, there is no need to disassemble the entire drawer. The tank is
removable and it is simply necessary to pull the drawer out to the maximum position,
remove the cover and take the tray out from the top. It is advisable to perform this
operation when the oven is cold.
- However, it is recommended to remove the entire drawer once a week in order to
clean the inside of the oven. To do this, open the drawer to its fully open position,
grasp it in both hands and raise it by pulling it slightly forward. The slides will thus
come free of the supporting rollers.
- To reassemble the drawer, perform the same operation in the opposite order.
- Never clean the device under a water jet, the infiltrations would risk to damage it in
a irreparable way.
- Never immerse the device, the cord or the plug in the water or quite other liquid to
avoid any electric shock.
- During a prolonged non-use, we recommend you strongly to keep the device
shielded from the humidity.
14