Publicité
Les langues disponibles
Les langues disponibles
First cleaning
Clean the device before the first use. (See 6 Cleaning)
Connection of the device
- Check that the tension and the frequency of the electricity network suit to the
values indicated on the descriptive plate.
- Make sure that every control knob is positioned on 0.
- Check that neither the cord nor the plug are damaged
- Unwind completely the electric power cable and connect it in a plug connected
with the earth.
- The device is connected.
NB: in case of connection of the device in a plug without earth protection or directly
on the electricity network, confide its connection to a qualified person .
c) Use of device :
Elements of command and display
Command/Display
Thermostat (n°1 on picture)
Orange pilot light
(n°2 on picture)
Putting on
Turn on the thermostat control knob (n°1 on picture) on the wished position: the
orange pilot light (n°2 on picture) ignites.
Put 30cl of water in the drawer
Once orange pilot light (n°2 on picture) is off, the machine reached the wished
temperature.
Temperature setting
Set the temperature by positioning the thermostat control knob (n°1 on picture)
to the desired temperature. The orange pilot light (n°2 on picture) switches on if
a higher level of temperature is required and switches off when the same is
reached.
To keep the bread soft and attractive, it is advisable to maintain the tempera-
ture at an average level. The maximum temperature setting must only be used
for short periods of time.
If the loaves are too dry, it will be necessary to reduce the temperature for
better heating and to check water level.
Function
Temperature setting
Machine is heating (pilot light on)
Temperature reached (pilot light off)
13
Publicité
